SnAg - Solder SnAg layer
Connection Diagram:
| LEFT |
| RIGHT |
| Connections(2) | Position | Remark |
| RIGHT | Right | |
| LEFT | Left | Thermal node |
| Parameters(5) | Default | Remark |
| Area[m*m] | 1e-4 | Surface area [m * m] |
| Thickness[m] | 0.1m | Thickness of the layer [ m] |
| InitialTemperature[Celcius] | 25 | Initial temperature of the heat sink |
| ThermalConductivity[W/mK] | 83 | Specific Thermal Conductivity in [Watt / meter Kelvin] |
| ThermalCapacity[W/m3K] | 1.67e6 | Specific Thermal Capacity in [Watt / m*m*m Kelvin] |
| Function | Layer from Solder SnAg. The heat is transfered in the direction of the thickness of the material. | |
| Special | Depending on the temperature the heat sink is colored, where the color level is defined by the voltage level in the animation properties dialog box. | |
| Note | Specify the initial temperature. | |
| Status | Standard | |
| Select from | Components\Library\Thermal\Layer\Solder | |
See also
Sn, SnPb,