Breadboard
The breadboard components provide you with simple method to virtually test basic electronics. You can simulate the model build on the breadboard linke any other circuit buildin Caspoc and you can even interconnect. The breadboard models has the same looks and functionality as the most common breadboards. You can place components on tpo of the breadboard and they are automatically connected.
You can choose from several breadboards, depending on the size of your circuit. The breadboard is selected as a component and in this way, you can add multiple breadboards in one simulation and make connections between them.
There are special breadboard components that can be used and connected on the breadboard. Using a battery and a multimeter, ohm's law can be demonstrated.
The breadboard components are selecteed from the breadboard components list and includes for example resistors, capacitors, semiconductors, multimeters and wires.
The wires are choosen based on their length and can be rotated by 90 degrees for horizontal or vertical alignment. Select the component and drag it on the breadboard or ext to the breadboad in case you want to rotate it. If a component is selected (single left mouse click) you can rotate it by typing Ctrl-R
In the section IC are various linear and logic IC's, such as Opamps, comperators, NE555 and the CMOS 4000 series. In the semiconductor section are npn, and pnp transistors, Mosfets, diodes and LED's
