BrushlessDC_NamePlateParameters - Brushless DC Permanent Magnet Machine Name Plate Parameters
Connection Diagram:
TEL | ||||
R | ||||
S | ROTOR | |||
T | ||||
H1 | H2 | H3 |
Connections(9) | Position | Remark |
TEL | Top | |
T | Left | |
S | Left | |
ROTOR | Right | |
R | Left | |
H3 | Bottom | Hall Sensor input T |
H2 | Bottom | Hall sensor input S |
H1 | Bottom | Hall Sensor input R |
Parameters(5) | Default | Remark |
PolePairs | 1 | Number of Pole Pairs |
Pnom | 5k | Nominal output power of the Brushless DC machine |
Vnom[V] | 50 | Nominal peak voltage at nominal angualr speed Nnom |
Nnom[rpm] | 500 | Nominal angular speed in RPM |
Efficiency[0..1] | 0.9 | Efficiency, defines both winding resistance and friction losses default set to 0.9 |
Function | Permanent Magnet Brushless DC Machine with trapezoidal back emf, based on he Name Plate Parameters | |
Special | At least Pnom has to be specified | |
Note | The inductance and resistance are given per phase. The resistance and inductance between two terminals equals 2*Rs and 2*Ls |
Status | Standard |
Select from | Components\Library\ElectricalMachines\Brushless |
See also
BLDCM, BLDCMdelta, BLDCMwye, BLDCM_FEM, BLDCM_FEM_StarWye, Brushless, BrushlessDC, BrushlessDC_Monitor, CommutationSequence120, EC, SinglePhase, wye,