B6HK - B6 Controlled Recifier
Connection Diagram:
|
| DC | ||||||
| L1 | |||||||
| L2 | |||||||
| L3 | |||||||
| GND | |||||||
| F1 | F2 | F3 | |||||
| Connections(19) | Position | Remark |
| L3 | Left | Input Phase L3 |
| L2 | Left | Input Phase L2 |
| L1 | Left | Input Phase L1 |
| GND | Right | DC bus ground |
| F3 | Bottom | |
| F2 | Bottom | |
| F1 | Bottom | |
| DC | Right | DC bus |
| Parameters(4) | Default | Remark |
| Ron[Ohm] | 1m | On resistance of the diodes |
| Von[V] | 0.6 | Conduction on state voltage |
| Roff[Ohm] | 1e6 | Blocking resistance of the diode |
| BV[V] | 100k | Break Down voltge per diode |
| Function | Use with the block B6_GateControl | |
| Status | Standard | |
| Select from | Components\Library\PowerConverters\Rectifiers | |
See also
B2C, B2U, B6c, B6U, Control, ControlFireAngle, ControlFireAngleCurrent, ControlSinglePhase, Kopie van ControlSinglePhase, W3C,