FuelCell - PEMC Fuel Cell
Connection Diagram:
| SENSOR | ||
| PH2 |
| DC |
| PHO | ||
| PO2 | ||
| MINUS | ||
| TEMP |
| Connections(17) | Position | Remark |
| TEMP | Bottom | |
| SENSOR | Top | |
| PO2 | Left | |
| PHO | Left | |
| PH2 | Left | |
| MINUS | Right | |
| DC | Right |
| Parameters(9) | Default | Remark |
| Lwire[H] | 100u | Wire inductance[H] |
| Lambda[14 - 23] | 23 | Membrane resistance coefficient, set between 14 to 23 |
| N | 50 | Number of Cells |
| Area[cm2] | 25 | Membrane area in cm*cm |
| Imax[A] | 100 | Maximum deliverable current [A] |
| B[V] | 0.1 | Concentration or mass transport voltage drop [V] |
| MembraneLength[uM] | 178 | Length or thickness of the membrane in micro meter [um] |
| tau[s] | 10 | Delay of the fuell cell in seconds |
| Rc[ohm] | 1m | Series resistance |
| Function | ||
| Status | Standard | |
| Select from | Components\Library\GreenEnergy\FuelCell\PEMFC | |
See also
Fuel,