RisingEdge - Rising Edge Generator
Connection Diagram:
SAW | |||
Connections(3) | Position | Remark |
SAW | Right | Saw waveform output |
Parameters(5) | Default | Remark |
d(0..1) | 1 | Duty Cycle ( 0 .. 1 ) Set to 1 for for a full sawtooth |
DC_offset | 0.5 | DC Offset |
Phase(0-360) | 0 | Phase in degrees ( 0 .. 360 ) |
Frequency | 1kHz | Frequency in Hz |
Amplitude | -0.5 | Amplitude |
Function | Rising Edge Function generator for PWM | |
Special | The duty cycle specifies the percentage of the rising and signal. | |
Note | Set d=1 for a full saw tooth |
Status | Standard |
Select from | Components\Library\AdvancedElectricalDrives\Source\Scalar |
See also
Carrier, CarrierMod, Constant, ConstantAngularElectricalSpeed, ConstantAngularShaftSpeed, Down, FallingEdge, Pi, Reference, sin, SquareWave, Step, Up, UpDown, V_F_Control,