L1NPESHIELD - Cable
Connection Diagram:
| U1 |
| X1 |
| W | Z | |
| W1 | Z1 | |
| Connections(10) | Position | Remark |
| Z1 | Right | |
| Z | Right | |
| X1 | Right | |
| W1 | Left | |
| W | Left | |
| U1 | Left |
| Parameters(6) | Default | Remark |
| R[Ohm/m] | 1m | DC Impedance [Ohm/meter] |
| X[Ohm/m] | 500u | AC Impedance [Ohm/meter] |
| F[Hz] | 50 | Frequency [Hz] |
| Lenght[m] | 1 | Line Length in [m] |
| C-line-line | 1n | Capacitance between phases ( including neutral) |
| C-line-shield | 0 | Capacitance between phase ( including neutral) and shield |
| Function | Cable where the impedance can be defined | |
| Special | There is no time delay due to transmission in this model. Only the impedance is modeled | |
| Status | Standard | |
| Select from | Components\Library\PowerSystems\Cable\SinglePhase | |
See also
L1N, L1NPE,