SolarPanel - Basic Solar Module
Connection Diagram:
|
| APLUS | |||||
| MINUS | ||||||
| Connections(20) | Position | Remark |
| MINUS | Right | |
| APLUS | Right |
| Parameters(6) | Default | Remark |
| E[W/m2] | 100 | Sunlight density in [Watt per square meter] Default set to 1000 if nothing connected at the input |
| Temperature[Celsius] | 25 | Cell temperature in degrees Celsius |
| Rparallel[Ohm] | 100k | Parallel resistance of the solar cell in [Ohm] |
| Rseries[ohm] | 10m | Series resistance of the solar cell in [Ohm] |
| Isc[A] | 100m | Short Circuit current [A] per 1000 Watt/m2 |
| Uoc[Volt] | 12 | Open circuit voltage in [Volt] |
| Function | ||
| Status | Standard | |
| Select from | Components\Library\Laboratory\Solar | |
See also
CharacteristicLoad, SolarCell, SolarModule,