VSI_PWM - Inverter IGBT Thermal System
Connection Diagram:
| ZA |
| U | |
| ZB | V | ||
| ZC | W | ||
| Connections(8) | Position | Remark |
| ZC | Left | |
| ZB | Left | |
| ZA | Left | |
| W | Right | |
| V | Right | |
| U | Right |
| Parameters(1) | Default | Remark |
| Vdc[v] | 600 | DC link voltage |
| Function | IGBT inverter system model with loss calculation. The IGBT switches are replaced by an averaged model. Therefore the simulation speed is large compared to the model with the IGBT switches | |
| Note | This model can not be used to regenerate energy from the three pahse terminals via the diodes to the DC link, since the diodes are not present in the model. | |
| Status | Standard | |
| Select from | Components\Library\PowerConverters\Averaged | |
See also
BoostAveraged, BuckAveraged, CCM, ccm_dcm, ccm_dcm_c, csi, CurrentAmplifier, CurrentControl, PIcontrol, ReferenceVoltage, vsi, VSI_PWM_DC, VSI_VF, VSI_VF_control,