BLACM - Brushless AC machine

preview

Connection Diagram:

PT    
L1     
L2SHAFT
L3    
        
    TORQUE
    XPOSITION
FILEMIDQLDQ

Connections(19)PositionRemark
XPOSITION Right
TORQUE Right
T Top
SHAFT Right
P Top
LDQ Bottom
L3 Left
L2 Left
L1 Left
IDQ Bottom
FILEM Bottom

Parameters(17)DefaultRemark
Lq[H] 1m Stator quadrature axis inductance in [H]
Ld[H] 1m Stator direct axis inductance in [H]
initialSpeed 0 Initial angular speed of the rotor [Rad/s]
frictionLinear[Nm/Rad/s] 1u Bearing friction of the rotor and eddy current loss friction[Nm/Rad/s]
frictionWindage[Nm/ (Rad/s)^2) ] 0 Windage friction loss [Nm/ (Rad/s)^2) ]
frictionCoulomb[Nm] 10u Constant coulomb friction due to Hysteresis loss in the stator [Nm]
V5[V/Rad/s] 0 Fifth Harmonic back-emf constant [V/Rad/s]
V3[V/Rad/s] 0 Third Harmonic back-emf constant [V/Rad/s], not visible in wye connected PMSM without neutral connection
initialPosition 0 Initial position of the rotor [Rad]
Rs[Ohm] 10m Stator Series Resistance
Ke[Vpeak/Rad/s]=[Nm/A]=[Wb] 0.1 Flux induced in the stator windings (Wb) by the rotor permanent magnets
PolePair[.] 10 Number of pole pairs [#]
inertia[Kgm2] 1m Rotor Inertia in [Kgm2]
V7[V/Rad/s] 0 Seventh Harmonic back-emf constant [V/Rad/s]
alpha_Rs[1/K] 0.00393 Temperature coefficient of the winding resistance [1/Degrees Celsius]
alpha_Br[1/K] -0.002 Temperature coeficient of the permanent magnet [1/Degrees Celsius]
Ls(LeakageInductance) 1u Stator leakage inductance [H]

Function

Status Standard

Select from Components\Library\ElectricalMachines\PMSM

See also
IPM, LdLq, LdLqFile, LdLqKT, LinearPMSM, PMSM, PMSM9phase, PMSMq, PMSM_DQ, PMSM_DQdq,
© 2024 CASPOC, All rights reserved. Home   |   Terms and Conditions   |   Legal   |   Export Compliance   |   Privacy Policy   |   Site Map