FallingEdge - Saw
Connection Diagram:
|
| SAW | |
| Connections(1) | Position | Remark |
| SAW | Right | Saw waveform output |
| Parameters(5) | Default | Remark |
| Amplitude | 0.5 | Amplitude |
| Frequency | 1kHz | Frequency in Hz |
| Phase(0-360) | 0 | Phase in degrees ( 0 .. 360 ) |
| DC_offset | 0.5 | DC Offset |
| d(0..1) | 1 | Duty Cycle ( 0 .. 1 ) Set to 1 for for a full sawtooth |
| Function | Saw waveform | |
| Special | The duty cycle specifies the percentage of the rising and signal. | |
| Note | Set d=1 for a full saw tooth | |
| Status | Standard | |
| Select from | Components\Library\ElectricalMachines\IRTF\Control\Source | |
See also
Carrier, RisingEdge, SawTooth, sin, SquareWave, Step, TriangleWave,