SawTooth - Saw

preview

Connection Diagram:

SAW

Connections(1)PositionRemark
SAW Right Saw waveform output

Parameters(5)DefaultRemark
d(0..1) 1 Duty Cycle ( 0 .. 1 ) Set to 1 for for a full sawtooth
DC_offset 0 DC Offset
Phase(0-360) 0 Phase in degrees ( 0 .. 360 )
Frequency 1kHz Frequency in Hz
Amplitude 1 Amplitude

Function Saw waveform
Special The duty cycle specifies the percentage of the rising and signal.
Note Set d=1 for a full saw tooth

Status Standard

Select from Components\Library\Source\System

See also
Decrease, ProgrammableSource, ProgrammableSourceInterpolated, Pulse, PulseWidth, PWMc, saw, SAW2, Signal2Current3Phase, Signal2Voltage3Phase, sin, SIN3phase, SIN3phaseAngularPostition, square, square2, SquareWave, SquareWave3phase, Sramp, step, Timer, TRAP, TRAP_DC, triangle, Triangle2, TriangleWave, Vector2Voltage,
© 2018 CASPOC, All rights reserved. Home   |   Terms and Conditions   |   Legal   |   Export Compliance   |   Privacy Policy   |   Site Map